Flexo presses

4 Colours Flexo Presses
 
00249 COMEXI BRUCH 1800
1976 Year
S/N 020376,
With central drum,
Web width: 820 mm, Print width: 800 mm,
Print length: from 320 mm to 1100 mm,
Are suitable for printing on the web materials (PP, PE, paper, laminates, etc.)
with thickness from 20 mkm to 100 mkm,
In 2004 was completed with with new anilox ceramic rollers (Zecher GmbH) (90,110,140 lines/cm),
Total quantity of form drums: 30 pcs,
Press completed with a telfer (cran) for installing the form drums,
two systems for edge aligning (type FiFe),
Dryers for each section and finishing dryer (tunnel type), air ventilation systems and a heater for drum.
Dimentions: Height 5 200 mm (without ventilation systems - 3 300 mm),
                    - Width 1 572 mm,
                    - Length 10 000 mm,
Weight: 25 000 kg,
Total heat power: 72 Kw, Power of the electric motors: 54 Kw,
Produced in Spain.
USD 24,900.- (EXW)
 
6 Colours Flexo Presses
 
00250 COMEXI BRUCH
1976 Year
S/N 111276,
With central drum,
Web width: 820 mm, Print width: 800 mm,
Print length: from 320 mm to 1100 mm,
Are suitable for printing on the web materials (PP, PE, paper, laminates, etc.)
with thickness from 20 mkm to 100 mkm,
In 2004 was completed with with new anilox ceramic rollers (Zecher GmbH) (90,110,140 lines/cm),
Press completed with a telfer (cran) for installing the form drums, two systems for edge aligning (type FiFe),
Dryers for each section and finishing dryer (tunnel type), air ventilation systems and a heater for drum.
Produced in Spain.
EUR 37,900.- (EXW)
 
00502 MARK ANDY SCOUT
2004 Year
6 flexo prining sections,
Worked hours:23 220,
Print width 260 - 275 mm,
Diameter of the roll at unwinding 1016 mm,
Max weight of the roll 362 Kg.
Diameter of the roll at winding 660 mm (simplex) / 381 mm (duplex),
Diameter of the pneumatic core shaft 76 - 152 mm.
System of the dtyers: standard hot air on all 6 sections.
One die-cutting section.
Max die-cut step 381 mm.
Max width of die-cut 254 mm.
Printing speed 15.2 - 92 m/min.
Thickness of the material for printing - 20 - 250 mkm.
Printing Length 108 - 381 mm.
Increament step: 1/8 N? 3,175 mm; 32 DP 1,14 mm / 0,38 mm.
Power of the elecrical motor 7 Kw, 3-phase, 50 Hz.
Requirement in the compressesd air 6 bar: 400-800 l/min.
 Power of the UV dryer 6 Kw.
Video control.
4 winding shafts.
Magnetic drum (96 cogs).
KELA hot embossing unit.
UV dryer with refrigerator.
USD 156,000.- (LOT/LOC)